HVACCompleted work$280
Performed a residential overtime diagnostic with 0.5 hour of Sunday and holiday labor.
HVACWork status not resolved
Photograph shows the exterior side panel of an outdoor HVAC condenser unit with condenser coil fins heavily packed with dirt, grass clippings, and organic debris, substantially blocking airflow through the louvers.
HVACWork status not resolved
Resident reports AC not cooling; air blows at 65°F but house remains at 78°F — probable diagnosis is AC blowing cold air but home is too hot; thermostat set correctly and vents open/clear.
HVACWork status not resolved
Photograph shows a vertical HVAC air handler unit installed in a basement utility room, with ductwork connected above, copper refrigerant lines, a black insulated line, and a condensate drain hose at the base; a large cast-iron drain stack is visible to the left.
HVACWork status not resolved
model GM9S800803BNAA, serial 2209185922, 80,000 BTU/hr heating input, 84,000 BTU/hr output capacity, 115V/1-phase/60Hz power supply, 1/2 HP motor, temperature rise 35–65°F
HVACWork status not resolved
Fieldpiece app diagnostic shows R-410A system with suction pressure 154.0 psig, liquid pressure 211.2 psig, actual superheat 1.0°F, and actual subcooling 0.9°F — both values critically low.
HVACWork status not resolved
Photograph shows Fieldpiece app refrigerant-side measurements for R-410A system: suction pressure 148.1 psig, liquid pressure 197.9 psig, suction temperature 53.1°F, liquid temperature 68.1°F, vapor saturation 52.1°F, liquid saturation 68.7°F, actual superheat 1.0°F, actual subcooling 0.6°F, discharge pressure 197.9 psig.
HVACWork status not resolved
Photograph shows a heavily dust-laden HVAC air filter being held in front of a furnace or air handler unit; the filter media is uniformly darkened with accumulated debris, indicating it is well past its service interval.
HVACWork status not resolved