HVAC System Replacement Estimate — 4-ton 17 SEER AC + 120,000 BTU
- HVAC
On October 5, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 835 Shadow Pine Drive, Fenton, MO 63026.
- Record date
Documented details
- Outcome: Paid in full
Available findings
- HVACCompleted work$13,264
Installed a 4-ton 17 SEER multi-speed American Standard air conditioner, S8V2D120M5PCA variable-speed 80% AFUE furnace, evaporator coil, Honeywell Prestige thermostat, AprilAire media cabinet, 30-amp disconnect, flue elbows and install materials.
- HVACWork status not resolved
Photograph shows a furnace manufacturer data plate with model FG6RA 120C-20[partially obscured], serial no. FGA020305864, rated at 120,000 BTUH input and 96,000 BTUH output, 115 VAC / 60 HZ / 1 PH / 12.2 AMPS MAX, with a 3/4 HP blower motor; a blue wire crosses the label.
- HVACWork status not resolved
Photograph shows a gray metal air handler unit installed in a utility closet, connected to sheet metal supply ductwork at the top, with copper refrigerant lines and exposed fiberglass batt insulation visible alongside the unit.
- HVACWork status not resolved
Photograph shows a furnace with digital display panel, sheet metal plenum and ductwork, an air handler/coil section, and rigid/flexible metal flue pipes in a mechanical room; a Fluke meter is visible resting on top of the ductwork.
- HVACWork status not resolved
Photograph shows a yellow handheld digital manometer with dual-port connections (P1, PUMP, P2) displaying readings of 0.32 inW on the upper line and -0.84 on the lower line, with the P2 valve in the closed position.
- HVACEstimate or proposed work$13,589
Estimate for installation of a 4-ton 16 SEER high-efficiency air conditioner with a 2-stage 120,000 BTU gas furnace with variable speed supply fan motor and enhanced humidity control, including removal of existing equipment.
- HVACEstimate or proposed work$11,731
Estimate for removal of existing equipment and installation of a 14 SEER 4-ton single stage air conditioner with 120,000 BTU single stage gas furnace with high efficient supply fan motor, including start-up, fine tuning, and permit.
- HVACEstimate or proposed work$14,879
Estimate for installation of a 4-ton 17 SEER Multi-Stage air conditioner with 2-stage 120,000 BTU gas furnace with variable speed supply fan motor and enhanced humidity control, including removal of existing equipment.
- HVACWork status not resolved
Photograph shows a Testo 557 digital manifold gauge connected to an outdoor condenser unit, displaying R454B refrigerant readings: superheat (SH) 14.7°F, subcooling (SC) 11.5°F, low-side pressure 1157 psi, and high-side pressure 2470 psi.
- HVACWork status not resolved
5PXCD010AS3HAAV, Serial No. 26051JKUCV) assembled in the USA, rated for R-454B refrigerant only, classified A2L (flammable), with a maximum allowable pressure of 650 PSI and a warning label regarding flammable refrigerant handling
- HVACWork status not resolved
Photograph shows a handwritten wiring diagram for a radon mitigation system indicating the mitigation relay opens on a leak, with labeled connections for Y-terminal (furnace space, 5th+, continuity), 24V Red, and Y out/CRM power.
- HVACWork status not resolved
- HVACWork status not resolved
Photograph shows a hand holding a yellow SPK2 digital thermometer reading 68.9°F near an HVAC air handler, with a white fibrous filter/insulation panel and plastic-wrapped flexible ductwork (labeled Class 1 Duct, Max Temp 200°F) visible in the background.