HVAC Capacitor Service — Dual run capacitor supplied
- HVAC
On April 1, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 10104 Grant Meadow Lane, St. Louis, MO 63123.
- Record date
Documented details
- Outcome: Paid in full
Available findings
- HVACCompleted work$349
Supplied a dual run capacitor and charged a trip fee for the service visit.
- HVACWork status not resolved
Photograph shows a dual run capacitor rated 45/7.5μF ±6% at 440VAC, 50/60Hz, installed inside an HVAC unit alongside a contactor; notable dust and debris accumulation is visible throughout the cabinet.
- HVACWork status not resolved
Photograph shows an outdoor air conditioning condenser unit with a manufacturer data plate indicating model NXA648GKA100, serial E173001082, R-410A refrigerant, 208/230V power supply, and a manufacture date of July 2017; label also states 'Installation Prohibited in Southwest.'
- HVACWork status not resolved
Photograph shows a Fluke 116 True RMS Multimeter with red test leads attached to an HVAC condenser unit, with a disconnect box visible to the right and condenser coil fins to the left.
- HVACWork status not resolved
Photograph shows a red digital instant-read thermometer with its probe inserted into a galvanized sheet-metal HVAC duct, with the display reading 135 (degrees).
- HVACWork status not resolved
Photograph shows a Testo digital manifold gauge connected to an outdoor AC condenser, displaying R410A refrigerant readings: low-side pressure 123.7 psi, high-side pressure 185.7 psi, suction temp 42.3°F, discharge temp 64.9°F, T1 32.0°F, T2 49.7°F, and subcooling 15.2°F.
- HVACWork status not resolved
Photograph shows a Fluke 323 True RMS clamp meter clamped around outdoor HVAC unit wiring, displaying approximately 25 amps AC current draw, with multiple colored conductors visible near the unit.
- HVACWork status not resolved
- HVACWork status not resolved
Photograph shows a Fluke True RMS multimeter with red test leads being used to take an electrical measurement at what appears to be a gray metal electrical enclosure or disconnect, with a metal condenser cage visible to the left.
- HVACWork status not resolved
Photograph shows a Fluke 323 True RMS Clamp Meter reading 9.4 A AC current, being used to test an HVAC air handler unit; a green LED status indicator is visible on the unit's control board in the background.