HVACCompleted work
Heating maintenance performed under the Residential Maintenance Plan.
HVACWork status not resolved
Photograph shows a UEI EM152 digital manometer displaying a reading of -3.35, positioned within an HVAC system enclosure with visible wiring and ductwork in the background.
HVACWork status not resolved
Photograph shows a green PCB control board with two DIP switch arrays (ALCD ADF08S 8-position and ALCD ADF07S 7-position), numerous surface-mount resistors, a screw terminal block labeled 'BUS/SENSOR | AIR SENSOR,' and a push-button switch.
HVACWork status not resolved
Photograph shows a UEi EM152 digital differential pressure manometer displaying a reading of -3.51, positioned near HVAC ductwork and wiring in what appears to be an air handler or furnace compartment.
HVACWork status not resolved
Photograph shows a pleated air filter with a red and white cardboard frame being inserted into the filter slot of a metal air handler unit.
HVACWork status not resolved
Technical manual page showing indoor blower operation DIP switch settings for cooling mode blower speed (Switches 5–6), blower speed adjustment (Switches 7–8), and blower speed ramping (Switches 9–10); a handwritten mark appears at the 'Medium High' speed row in TABLE 10.
HVACWork status not resolved
Photograph shows a Fasco brand draft inducer blower motor (Type 70626175, 120V, 60Hz, 3200/3200 RPM, sealed ball bearings) mounted to a furnace inducer housing assembly; copper windings are visible through the motor end.
HVACWork status not resolved
Photograph shows a close-up view of an HVAC condenser unit's louvered fin coil panel, appearing dark and heavily coated with dust and debris; a circular fan shroud or housing is partially visible at the top of the frame.
HVACWork status not resolved
HVACWork status not resolved
Photograph shows a Capcom brand single-run capacitor (model 27L571S, 4uF, +6/-6%, 50/60Hz, 370VAC, Protected P921, AT0000AFC) being held in front of an HVAC equipment cabinet.