HVACCompleted work
Service visit on August 4, 2026 at 2010 First Capitol Drive; no service lines itemized and no charge.
HVACWork status not resolved
Photograph shows large-diameter round HVAC ductwork running along an exposed ceiling in a commercial corridor, including a 90-degree elbow bend, multiple cylindrical ceiling diffusers, and associated metal strut framing; a blue annotation line is drawn over the image highlighting a vertical duct run.
HVACWork status not resolved
Photograph shows a wall-mounted return air grill (Loft 7, Return Air 2) measuring 7"3/4 x 13"3/4, with an annotated vertical distance of 7'5" from the top of the grill to the top of the return air duct.
HVACWork status not resolved
Photograph shows large white HVAC ductwork and associated white piping above a ceiling level, with a supply/return air grille visible; a blue hand-drawn circle annotation highlights a section of the white ceiling surface near the ductwork and pipe connections.
HVACWork status not resolved
Photograph shows flexible metallic conduit rough-in with annotated runs: 2 ft into room 12, 2 ft at ceiling junction, and 5 ft into room 13, terminating at an electrical box mounted on the wall.
HVACWork status not resolved
Photograph shows multiple runs of metallic flexible conduit and black wiring routed from a junction box area inside Loft 13, with annotated routing notes indicating 3 feet horizontal, a 90-degree turn downward, then 1.5 feet; a flexible HVAC duct and white conduit/pipe are also visible in the ceiling space.
HVACWork status not resolved
Photograph shows a large perforated metal HVAC air diffuser or return air grille installed diagonally within a suspended drop ceiling grid with acoustic tiles; a small circular ceiling-mounted device is also visible nearby.
HVACWork status not resolved
Photograph shows a flexible duct routed through a ceiling plenum, connecting via a metal elbow to a 3-foot stub, annotated as serving the room across from room 13.
HVACWork status not resolved
Photograph shows existing rigid sheet metal supply trunk ductwork and flexible duct connection in an overhead plenum space, with annotations identifying supply air, existing return air, 5'6" clearances, and the wall facing the hallway.
HVACWork status not resolved
Work order for loft 13 nail salon ventilation: eliminate ceiling exhaust and install two in-wall exhaust ducts (150 CFM each) for pedicure chair and nail table per page M100/A200 specs.
HVACWork status not resolved
Photograph shows exposed white spiral HVAC ductwork running along an open ceiling with steel trusses; annotations indicate a 12-foot wall height (yellow) and a 20-foot duct drop or pendant assembly (blue circle).
HVACWork status not resolved
Photograph shows open ceiling cavity with rectangular sheet metal ductwork and a round duct/pipe; annotations indicate distances to wall from Room 12 (3'), Main Hallway (2'1/2), and Room 13 (5').
HVACWork status not resolved
Photograph shows a ceiling-mounted return air grille (labeled 'Return air 1') in a salon space identified as 'Loft 7', with an annotated vertical measurement of 8'8" from the top of the grille to the top of the return air box.
HVACWork status not resolved
Photograph shows a ceiling-mounted HVAC diffuser/cassette unit in a drop-ceiling grid with an annotation noting the diffuser can be swapped for a 24"x24" return air grille; a yellow line indicates an approximate 2-foot measurement reference.