HVAC Installation — 90° fitting installed on kinked drain line
- HVAC
On August 3, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 4171 CASTLEMAN, St. Louis, MO.
- Record date
Documented details
- Outcome: Paid in full
Available findings
- HVACCompleted work$219
Technician installed a new 90° fitting where the drain line was kinked, cleared the drain line, and checked the charge and filter to ensure the coil was not freezing.
- HVACWork status not resolved
Photograph shows two copper refrigerant lines (suction and liquid) bending around the corner of a metal HVAC cabinet, with a galvanized duct fitting visible at right and debris on the cabinet top surface.
- HVACWork status not resolved
Photograph shows water droplets and pooling on top of a metal appliance housing, with visible mineral staining and corrosion around a white plastic supply fitting and valve assembly, indicating an active or recent water leak at the connection point.
- HVACWork status not resolved
Photograph shows a white PVC tee fitting with a small brass needle valve connected to a vertical PVC pipe, with copper/metal tubing routed toward an adjacent HVAC unit casing; older metal pipes and brick wall visible in background.
- HVACWork status not resolved
Photograph shows a furnace data plate labeled AHI/ANI Certified for a Forced Air Furnace Cat. I, model ML180UH07QE36A-55, serial 1719J12353, rated 120V/60Hz/1-phase with 12.0 max amps and 1/2 HP blower motor; the surrounding metal surface shows rust staining and debris.
- HVACWork status not resolved
Photograph shows a Testo 557 digital manifold gauge connected to an HVAC system, displaying R454B refrigerant readings: low-side 127.5 psi with 18.8°F superheat (SH), high-side 313.0 psi with 5.8°F subcooling (SC).
- HVACWork status not resolved
Photograph shows a Testo 557 digital manifold gauge displaying R454B refrigerant readings: suction side 126.9 psi with 21.3°F superheat (SH), high side 318.0 psi with 7.1°F subcooling (SC).
- HVACWork status not resolved