HVACCompleted work$310
Performed a residential diagnostic service with 1.5 hours of labor and supplied 12 units of 18-6 thermostat wire.
HVACWork status not resolved
Photograph shows a Fluke 323 True RMS Clamp Meter clamped around wiring inside an HVAC air handler, displaying a reading of 6.7 A AC.
HVACWork status not resolved
Photograph shows a metal HVAC air handler unit in an open wall/utility chase with sheet metal ductwork and foil-mastic tape sealing
HVACWork status not resolved
Photograph shows a furnace or air handler unit with rigid and flexible flue/exhaust piping, sheet metal ductwork connections at the top (with foil tape), a service company sticker affixed to the cabinet face, and a yellow handheld instrument (possibly a combustion analyzer) resting against the unit.
HVACWork status not resolved
Photograph shows a gas furnace in a basement with sheet metal supply plenum, a round flue/exhaust pipe exhibiting dark soot and debris accumulation at the elbow joint, a combustion analyzer instrument resting on the furnace cabinet, and a service sticker affixed to the unit.
HVACWork status not resolved
Photograph shows a Testo digital manifold gauge set connected to an HVAC refrigerant system, displaying high-side pressure of 300.3 psig (HP dew 96.0°F), low-side pressure of 129.9 psig (LP evap 44.9°F), suction line temp 55.4°F, and subcooling/superheat value of 10.5°F.
HVACWork status not resolved
UnclassifiedWork status not resolved
Photograph shows a dark-colored appliance with a handle and ribbed door panel positioned in a corner or tight space adjacent to a white wall or door frame, viewed from a tilted angle.
HVACWork status not resolved
Photograph shows the interior of an HVAC unit with the access panel removed, revealing a green control board with an illuminated red LED indicator, multiple colored wiring harnesses bundled with cable ties, warning labels, and a white multi-pin connector; dust and debris are visible on interior surfaces.
UnclassifiedWork status not resolved
Photograph shows a collapsed or damaged drop ceiling section in a finished lower-level room, with a bent metal grid rail hanging down and an exposed opening revealing deteriorated, discolored material above the ceiling plane.