Hi, I'm 810 Edgar Road. I only speak from this property's source-backed records — 8 documents from 1 contributor. If there's no record, I'll tell you I don't know rather than guess. Every claim links to its source.
810 Edgar Road
Across 8 records on this home
Completed work
Invoices and paid receipts
Estimated · not confirmed
Quotes, estimates, and other amounts not confirmed as performed
Property History Report
Negotiate this home like you've seen its receipts. You have.
Free right now · built from this home's 8 documented records
Fresh House Property Summary
Highlights selected from 8 documented records for this property.
- HVAC · Air conditioner and gas furnace replaced with new equipment · Apr 2026
- HVAC · New evaporator coil, Wi-Fi thermostat, and condensate piping installed · Apr 2026
- HVAC · New condenser pad and 30-amp disconnect installed with outdoor unit · Apr 2026
- HVAC · New two-stage gas furnace installed with PVC venting · Apr 2026
RECORD SUMMARY
Fresh House preserves inspections, repairs, and appraisals so a home's history is never lost.
This page contains 8 documented records for 810 Edgar Road, Webster Groves, MO 63119, dated in April 2026. The amount summary includes $11,116.32 in completed work across HVAC, $48,033 in estimates; appraisal values and permit-declared valuations are excluded.
HVAC Service Invoice — No-charge HVAC service visit
- HVAC
Built from Housecall Pro data
HVAC
HVACOnly original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Replacement Estimate — 2.5-ton Lennox A/C and coil options
- HVAC
Options: Standard 2.5-ton Air Conditioner and Evaporator Coil $6,933 · Elite 16 SEER 2.5-ton Air Conditioner and Evaporator Coil $7,628 (all expired)
Built from Housecall Pro data
- $6,933HVACEstimate for two options for a 2.5-ton Lennox air conditioner and evaporator coil replacement, a standard Merit model and an Elite 16 SEER model, including condenser pad, disconnect, materials and labor; both options expired.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Replacement Estimate — 3 Lennox furnace + A/C options, expired
- HVAC
Options: 2.5-ton ML14 ML93-70B $12,156 · 2.5-ton ML14 ML296V-70B $12,962 · 2.5-ton EL16 EL297E-70B $13,807 (all expired)
Built from Housecall Pro data
- $12,156HVACEstimate for three options replacing the furnace and 2.5-ton air conditioner with Lennox equipment, coil, thermostat, and install materials; all options expired and none approved.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Replacement Estimate — 3 Lennox furnace + A/C options, expired
- HVAC
Options: 2.5-ton ML14 ML93-70B $12,156 · 2.5-ton ML14 ML296V-70B $12,962 · 2.5-ton EL16 EL297E-70B $13,807 (all expired)
Built from Housecall Pro data
- $12,156HVACEstimate for three HVAC replacement options at 810 Edgar Road, each with a Lennox furnace, air conditioner, coil, thermostat and install materials; all options are expired and none approved.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Furnace Replacement Estimate — 4 gas furnace replacement
- HVAC
Options: Standard 93% 70,000 BTU gas furnace $5,752 · Elite 70,000 BTU gas furnace "HE" $6,526 · Silver 96% Gas Furnace $4,592.50 · Gold 2-stage 97% Gas Furnace (HE) $5,296.50 (all expired)
Built from Housecall Pro data
- $4,593HVACEstimate for gas furnace replacement with four options (standard 93% 70,000 BTU, Elite 70,000 BTU, Silver 96%, Gold 2-stage 97%), including labor, PVC venting, install materials and filter rack; all options expired.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Estimate — 2.5-ton A/C and coil, 2 options
- HVAC
Options: 14 SEER 2.5-ton Air Conditioner & Coil $6,443.50 · 16 SEER 2.5-ton Air Conditioner & Coil $6,857 (all expired)
Built from Housecall Pro data
- $6,444HVACEstimate for two options to install a 2.5-ton air conditioner and cased evaporator coil, a 14 SEER option and a 16 SEER option, including labor, condenser pad and 30-amp disconnect.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Furnace Replacement Estimate — Two 70,000 BTU gas furnace
- HVAC
Options: Standard 93% 70,000 BTU gas furnace $5,752 · Elite 70,000 BTU gas furnace "HE" $6,526 (all expired)
Built from Housecall Pro data
- $5,752HVACEstimate for replacement of a gas furnace with two options: a standard 93% 70,000 BTU single-stage furnace or an elite two-stage 70,000 BTU furnace, including labor, PVC venting, install materials and a filter rack.
Only original contributor can modify this entry
Create an account to manage your contributions over time
HVAC Installation — 96% 2-stage furnace + 2.5-ton A/C
- HVAC
Built from Housecall Pro data
- $11,116HVACInstalled a 2.5-ton Silver 14 series air conditioner, a 60k 96% 2-stage gas furnace, a 3-ton cased evaporator coil, a Sensi Wi-Fi thermostat, condenser pad, 30-amp disconnect, and PVC condensate piping with install materials and labor.
- HVACPhotograph shows a basement mechanical room with a high-efficiency gas furnace (dark gray cabinet with digital display), large sheet metal supply ductwork overhead, PVC flue/condensate pipes, copper refrigerant lines, and a wall-mounted humidifier or air handler unit to the left.
- HVACPhotograph shows two outdoor HVAC condensing units mounted on concrete pads against a brick exterior wall, with an electrical disconnect box mounted nearby, refrigerant lines visible at the base, and significant overgrown vegetation and leaf debris accumulating around both units.
- HVACPhotograph shows an open HVAC air handler/furnace with a UEI EM152 digital manometer attached and displaying a reading of 7.08, with internal blower motors and wiring visible.
- HVACPhotograph shows two outdoor air conditioning condensing units mounted on concrete pads along the exterior brick wall, with refrigerant line sets, electrical conduit, and a disconnect box visible; overgrown vegetation and leaf debris surround the units.
- HVACPhotograph shows a UEI PDT650 pocket thermometer clipped to a sheet metal HVAC duct or air handler enclosure, displaying a reading of 73°F, with insulated flexible ductwork visible in the background.
- HVACPhotograph shows a UEi EM152 digital differential pressure manometer displaying a reading of -053, connected via clear tubing to what appears to be an HVAC air handler cabinet; the word 'COOL' is annotated in red at the bottom of the image.
- HVACPhotograph shows a Testo 557 digital manifold gauge connected to an outdoor condenser unit, displaying R454B refrigerant readings: superheat (SH) 20.4°F, subcooling (SC) 10.3°F, low-side pressure 107.3 psig, and high-side pressure 282.4 psig.
- HVACPhotograph shows a UEI PDT650 pocket thermometer clipped to a metal pipe reading 114°F, positioned adjacent to foil-taped HVAC ductwork labeled AF 099 / 181A-P / 181B-FX.
- HVACPhotograph shows a UEI EM152 digital manometer connected to an HVAC unit interior displaying a differential pressure reading of -1.69; HVAC wiring and components are visible in the background.
- HVACa second condenser unit is partially visible to the left
- HVACPhotograph shows a UEI PDT650 pocket thermometer reading 104.7°F placed on a sheet metal supply duct sealed with foil tape (AF 099 / 181B-FX), with a pipe running across the duct surface.
- HVACPhotograph shows a UEI EM152 differential pressure manometer displaying a reading of -870, connected via two probe hoses to what appears to be an HVAC unit cabinet.
- HVACPhotograph shows a UEi EM152 digital differential pressure manometer connected via two clear tubes to an HVAC unit, displaying a reading of -0.66.
- HVACPhotograph shows a UEI EM152 digital manometer displaying a reading of -7.48, being used near mechanical piping and HVAC equipment.
HVAC
HVAC
HVAC
HVACOnly original contributor can modify this entry
Create an account to manage your contributions over time
Only the original contributor can modify this entry · Create an account to manage your contributions over time.
Add inspections, repairs, appraisals,
or anything that shaped this home.