HVAC Service Invoice — No-charge HVAC service visit
- HVAC
On April 17, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
- Record date
Available findings
- HVACCompleted work
- HVACWork status not resolved
Complete public upload archive
All 8 public upload records returned by the Fresh House property feed are available across 1 server-rendered page. This page shows records 1 to 8.
Record details are source-backed where available. Permit status and descriptions repeat the publishing agency's data; they do not independently establish that work was completed.
Return to the property overviewOn April 17, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
On April 17, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for two options for a 2.5-ton Lennox air conditioner and evaporator coil replacement, a standard Merit model and an Elite 16 SEER model, including condenser pad, disconnect, materials and labor; both options expired.
On April 17, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for three options replacing the furnace and 2.5-ton air conditioner with Lennox equipment, coil, thermostat, and install materials; all options expired and none approved.
On April 17, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for three HVAC replacement options at 810 Edgar Road, each with a Lennox furnace, air conditioner, coil, thermostat and install materials; all options are expired and none approved.
On April 19, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for gas furnace replacement with four options (standard 93% 70,000 BTU, Elite 70,000 BTU, Silver 96%, Gold 2-stage 97%), including labor, PVC venting, install materials and filter rack; all options expired.
On April 19, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for two options to install a 2.5-ton air conditioner and cased evaporator coil, a 14 SEER option and a 16 SEER option, including labor, condenser pad and 30-amp disconnect.
On April 19, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Estimate for replacement of a gas furnace with two options: a standard 93% 70,000 BTU single-stage furnace or an elite two-stage 70,000 BTU furnace, including labor, PVC venting, install materials and a filter rack.
On April 23, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 810 Edgar Road, Webster Groves, MO 63119.
Installed a 2.5-ton Silver 14 series air conditioner, a 60k 96% 2-stage gas furnace, a 3-ton cased evaporator coil, a Sensi Wi-Fi thermostat, condenser pad, 30-amp disconnect, and PVC condensate piping with install materials and labor.
Photograph shows a basement mechanical room with a high-efficiency gas furnace (dark gray cabinet with digital display), large sheet metal supply ductwork overhead, PVC flue/condensate pipes, copper refrigerant lines, and a wall-mounted humidifier or air handler unit to the left.
Photograph shows two outdoor HVAC condensing units mounted on concrete pads against a brick exterior wall, with an electrical disconnect box mounted nearby, refrigerant lines visible at the base, and significant overgrown vegetation and leaf debris accumulating around both units.
Photograph shows an open HVAC air handler/furnace with a UEI EM152 digital manometer attached and displaying a reading of 7.08, with internal blower motors and wiring visible.
Photograph shows two outdoor air conditioning condensing units mounted on concrete pads along the exterior brick wall, with refrigerant line sets, electrical conduit, and a disconnect box visible; overgrown vegetation and leaf debris surround the units.
Photograph shows a UEI PDT650 pocket thermometer clipped to a sheet metal HVAC duct or air handler enclosure, displaying a reading of 73°F, with insulated flexible ductwork visible in the background.
Photograph shows a UEi EM152 digital differential pressure manometer displaying a reading of -053, connected via clear tubing to what appears to be an HVAC air handler cabinet; the word 'COOL' is annotated in red at the bottom of the image.
Photograph shows a Testo 557 digital manifold gauge connected to an outdoor condenser unit, displaying R454B refrigerant readings: superheat (SH) 20.4°F, subcooling (SC) 10.3°F, low-side pressure 107.3 psig, and high-side pressure 282.4 psig.
Photograph shows a UEI PDT650 pocket thermometer clipped to a metal pipe reading 114°F, positioned adjacent to foil-taped HVAC ductwork labeled AF 099 / 181A-P / 181B-FX.
Photograph shows a UEI EM152 digital manometer connected to an HVAC unit interior displaying a differential pressure reading of -1.69; HVAC wiring and components are visible in the background.
a second condenser unit is partially visible to the left
Photograph shows a UEI PDT650 pocket thermometer reading 104.7°F placed on a sheet metal supply duct sealed with foil tape (AF 099 / 181B-FX), with a pipe running across the duct surface.
Photograph shows a UEI EM152 differential pressure manometer displaying a reading of -870, connected via two probe hoses to what appears to be an HVAC unit cabinet.
Photograph shows a UEi EM152 digital differential pressure manometer connected via two clear tubes to an HVAC unit, displaying a reading of -0.66.
Photograph shows a UEI EM152 digital manometer displaying a reading of -7.48, being used near mechanical piping and HVAC equipment.
View 810 Edgar Road, Webster Groves, MO 63119 on Fresh House