HVAC Installation — 3-ton 17 SEER2 A/C + 80,000 BTU furnace
- HVAC
On August 5, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 9427 Garber Road, St. Louis, MO 63126.
- Record date
Documented details
- Outcome: Paid in full
Available findings
- HVACCompleted work$15,258
Supplied and installed an American Standard 3-ton 17 SEER2 air conditioner, evaporator coil, 80,000 BTU variable-speed gas furnace, Sensi Wi-Fi thermostat, media filter, supply air transition, and install materials with journeyman and apprentice labor.
- HVACWork status not resolved
Photograph shows a large gray air handler unit installed in an unfinished basement mechanical room, with sheet metal supply plenum and ductwork sealed with foil tape, PVC condensate drain lines, refrigerant copper tubing, and flexible metallic conduit connections.
- HVACWork status not resolved
Photograph shows a cardboard shipping box for an air conditioning and heating systems unit, with a product label displaying model number 5A7A7036A1000B and serial number 26163P5DJF, sitting on a driveway; the box shows minor damage at the top corner.
- HVACWork status not resolved
Photograph shows a Carrier brand air conditioning condenser unit mounted on a brick pad along the exterior wall, with a wall-mounted disconnect box and conduit/refrigerant lines running from the unit to the structure.
- HVACWork status not resolved
Photograph shows an outdoor air conditioning condenser unit resting on a makeshift red brick pad against a white exterior wall, with refrigerant lines and electrical conduit running up the wall to a disconnect box; loose brick pavers are stacked nearby.
- HVACWork status not resolved
Photograph shows a large gray upflow air handler unit in an unfinished basement, with insulated refrigerant lines, a filter/control box mounted on the front, and round silver flex duct and black insulated pipe running upward to the ceiling.
- HVACWork status not resolved
Photograph shows a large gray upflow high-efficiency furnace/air handler installed in a basement, with dual white PVC intake and exhaust flue pipes routed upward, sheet metal plenum and ductwork connected at the top, and a flexible metallic conduit; a water heater is partially visible behind the unit.
- HVACWork status not resolved
Photograph shows a gray vertical furnace/air handler unit in a basement with its lower access panel open exposing internal wiring and components, a large sheet metal supply plenum sealed with foil HVAC tape above the unit, a flexible black corrugated line and white PVC pipe routed overhead, and exposed wood framing surrounding the installation.
- HVACWork status not resolved
loose bricks and pavers are stacked adjacent to the unit
- HVACWork status not resolved
- HVACWork status not resolved
Photograph shows multiple white PVC drain-waste-vent pipes (labeled 'FOR DRAIN, WASTE AND VENT ONLY') running vertically in an unfinished basement, alongside a copper supply pipe with black foam insulation and a blue-capped valve or fitting.
- HVACWork status not resolved
Photograph shows a furnace/air handler unit installed in a basement utility area, with large black flexible ductwork overhead and sheet metal plenum connections; a condensate or drain line is visible at the unit.