HVAC Service Call — Labor and trip fee service call
- HVAC
On January 21, 2026, JLM HEATING AND AIR CONDITIONING documented HVAC at 9613 Cinnabar Drive, St. Louis, MO 63126.
- Record date
Documented details
- Outcome: Paid in full
Available findings
- HVACCompleted work$219
Labor and trip fee for an HVAC service call at 9613 Cinnabar Drive.
- HVACWork status not resolved
Photograph shows a furnace equipment data plate with Model 58SSBC080-BC, Series 100, Serial 3187082382, Input 95,000 BTU/HR, natural gas, Venting Category I, max supply pressure 13.6 in. WC, min supply pressure 4.5 in. WC.
- HVACWork status not resolved
Photograph shows a metal data plate on a 1985 central furnace (Category I, NG) rated at 115V/60Hz single phase, max 7.0 amps, manifold pressure 3.5 IN WC, designed max outlet air temperature 190°F, blower 153, motor 1/3 HP, static pressure 0.5.
- HVACWork status not resolved
Photograph shows an outdoor air conditioning condenser unit (Model 113AMA030-E, Serial 2610E21238, manufactured June 2010, R410A refrigerant) with the condenser coil grille visibly clogged with heavy debris and dirt accumulation.
- HVACWork status not resolved
Photograph shows an aged water heater in a basement utility area with a large blue-painted metal flue/vent pipe exhibiting heavy corrosion, rust, and deterioration at its base collar, along with copper and galvanized supply piping visible below.
- HVACWork status not resolved
Photograph shows a furnace unit in the background with a metal flue pipe, flexible and rigid silver ductwork running along the unfinished ceiling joists.
- HVACWork status not resolved
Photograph shows the interior of a pipe as viewed on a borescope/inspection camera display, with heavy white crystalline buildup and scaling covering the pipe walls and a visible seam or joint line running diagonally across the pipe interior.
- HVACWork status not resolved
WC, min supply pressure 4.5 in. WC, max amps 7.0, and temp rise 50–80°F
- HVACWork status not resolved
Photograph shows a sheet metal air handler/furnace unit with a galvanized metal flue pipe running diagonally from the appliance up through the ceiling via an elbow fitting; a white water heater is partially visible in the background.
- HVACWork status not resolved
Photograph shows sheet metal ductwork with a wye/tee fitting connecting multiple round duct branches, secured with screws and foil tape at joints, located in an unfinished basement ceiling space.
- HVACWork status not resolved
Photograph shows the underside of a dark metal HVAC plenum or air handler with heavy dark staining and spotting across its surface, visible alongside copper plumbing pipes and wood framing in what appears to be a crawl space or underfloor mechanical area.
- HVACWork status not resolved
Photograph shows sheet metal HVAC ductwork running between wooden floor joists in a basement or crawl space area, with visible dark streaking and staining on the duct surface; fiberglass batt insulation is partially visible adjacent to the duct.
- HVACWork status not resolved
Photograph shows a galvanized steel flue/exhaust vent pipe with an elbow fitting connecting what appears to be a furnace or air handler to a common vent; a furnace or air handler unit is visible to the left.
- HVACWork status not resolved
Photograph shows the interior of an HVAC appliance (likely a furnace or boiler) with a visible blue/orange flame or igniter glow, metallic burner or heat exchanger components, mechanical fasteners, and a cylindrical blower or motor component; staining is visible on the adjacent wall surface.
- HVACWork status not resolved